Hierba seca

A 4 inch hand pipe worked into a tank form. Novelty shape, standard spoon function, with a bowl and carb where you would expect them.Clear, red or green.Specs Borosilicate glass 4 inch Tank form Clear, red or green CareSoak in isopropyl and coarse salt,...

A 4.7 inch spoon pipe with a pentagonal faceted body rather than a round one. Flat faces mean it sits still on a table instead of rolling off, which is a small thing that matters more than it sounds.Blue and green worked glass.Specs Borosilicate...

A straightforward matrix perc ash catcher. The gridded percolator drills dozens of small holes through a cylinder, giving finer diffusion than slit-cut percs and a noticeably cooler hit.Available in both 14mm and 18mm, in 90 or 45 degree. Clear or green.Specs Borosilicate glass Available...

A 4.5 inch spoon pipe in wig wag glass. The chevron pattern is hand-pulled through the body, which takes real time at the torch and is why these cost more than a plain coloured spoon.Four colourways, two of them two-tone.Specs Borosilicate glass 4.5 inch...

An ash catcher shaped as a banana with a showerhead percolator inside. The showerhead spreads smoke through slits around a flared head for even bubbling; the banana is purely for the look of it.14mm.Specs Borosilicate glass 14mm Showerhead percolator Banana form CareFill just above...

A 5 inch ash catcher running multiple arms into a honeycomb perc, in multi-colour glass. Two stages of diffusion: the arms split the stream, the honeycomb breaks it down further.14mm female fitment, which is the opposite of most catchers. Check your bong's joint first.Specs...

A 4.7 inch wig wag spoon with a wider bowl than standard. More capacity per pack, which suits sharing or anyone who would rather not reload every few minutes.Wig wag colour is pulled by hand into a repeating chevron, so no two pieces match....

A 4 inch spoon pipe in wig wag glass, where two colours are pulled by hand into a repeating chevron that wraps the body. It is slow work to make, which is why wig wag pieces sit above plain colour on price.Standard spoon layout...

A novelty ash catcher worked into a duck form. It does the ordinary job of catching ash and filtering smoke before your bong, in a shape that will draw comment.14mm, 90 degree.Specs Borosilicate glass 14mm, 90° Duck form CareChange water regularly and soak in...

A 6 inch ash catcher with three honeycomb percs stacked in series. Three stages of fine diffusion is about as much cooling as you can get from a catcher, at the cost of a genuinely restricted draw.14mm female. Not the one to buy if...

A 5 inch recycler ash catcher with a honeycomb disc perc. The recycler loop keeps water moving between chambers rather than sitting, extending contact time and cooling harder than a static chamber does.Note the fitment: this one is 14mm female, unlike most catchers which...

An ash catcher with a matrix percolator, which is a gridded cylinder drilled with rows of small holes rather than cut with slits. It produces very fine, even bubbling across the whole chamber.More diffusion means more drag, so this suits people who prioritise a...

An ash catcher with a built-in downstem, so it diffuses smoke on the way in rather than relying on your bong's stem to do all the work. Ash and resin collect here instead of in your main chamber.Available in both 14mm and 18mm, which...

A disc perc ash catcher, where smoke passes through a flat slitted plate to break into fine, even bubbles. Disc percs are among the easiest to clean, since there is one flat surface rather than arms or holes.Five colourways. 14mm male, 45 degree.Specs Borosilicate...

A showerhead perc ash catcher. Smoke runs up a central stem and exits through slits around a flared head, spreading bubbles wide across the chamber. Good cooling without the tight draw of a gridded perc.Five colourways including milk blue and smoke. 14mm male, 90...

An ash catcher using a three arm slitted downstem perc. Three separate arms split the smoke stream three ways before it hits the water, spreading the bubbling across the chamber rather than concentrating it in one column.Good diffusion with a fairly open draw. 14mm...

A tree perc catcher with eight separate arms, each slitted at the base. Splitting smoke eight ways spreads the bubbling right across the chamber and cools hard without the tight restriction of a honeycomb.Available in 14mm and 18mm, and in eight colourways, the widest...

A cylinder ash catcher with a honeycomb disc percolator. Honeycombs are drilled with dozens of small holes rather than cut with slits, which produces the finest bubbling of any common perc style and the most cooling per chamber.The trade is that small holes clog...

An ash catcher with a donut percolator, a ring-shaped chamber that smoke passes through and around. The open centre keeps the draw more relaxed than a gridded perc while still diffusing well.14mm male, 90 degree. Yellow or blue.Specs Borosilicate glass 14mm male, 90° Donut...

A cylinder ash catcher running two percolators in series. Smoke gets filtered twice before it reaches your bong, which cools it considerably more than a single perc but does add drag to the pull.Worth it if you want maximum smoothness and do not mind...

An ash catcher with multiple orb percolators stacked through the chamber. Each orb filters in turn, so smoke passes through several stages of water before it leaves, and the multi-coloured glass makes the action visible.More percs means more cooling and more drag. 14mm male,...

A cylinder ash catcher with a disc percolator. Unlike a dry catcher this one holds water, so it filters and cools as well as trapping ash. A disc perc pushes smoke through a flat slitted plate for fine, even bubbling.Fill it just above the...

An ash catcher shaped like a chess pawn, in jade-effect glass. Novelty in form, standard in function: it traps ash and filters smoke before it reaches your bong.Five jade colourways. 14mm, 90 degree.Specs Borosilicate glass, jade finish 14mm, 90° Chess pawn form Blue, pink,...

A dropdown recycler catcher with a matrix percolator. The dropdown geometry lowers the connection point, taking strain off your bong's joint and shifting weight away from the neck. The recycler loop keeps water circulating instead of sitting still.Matrix percs are gridded with many small...

A recycler ash catcher with an inline percolator. Recyclers loop water continuously between two chambers rather than letting it sit, which keeps smoke in contact with moving water for longer and delivers a noticeably cooler hit.It also looks the part, since the loop is...

A dry ash catcher takes ash and debris before it reaches your bong, which means your water stays clean and your rig needs stripping down far less often. Dry means no second water chamber, so there is no extra drag on the draw.Beaker base...

A bell-shaped cylinder catcher with a showerhead percolator. Showerheads push smoke up a central stem and out through slits around a flared head, which spreads bubbles wide for even filtration without much added restriction.The bell shape gives the chamber more water volume than a...

A compact dry ash catcher with a swan arm, which curves the body up and back rather than straight out. On a smaller bong that keeps the catcher from sticking out awkwardly or unbalancing the piece.No water chamber, so no additional drag. 14mm male...

An ash catcher pairing an orb chamber with a showerhead percolator. The showerhead does the diffusing while the orb shape gives the water room to move, which reduces splashback up into your bong.Blue or green glass. 14mm male, 90 or 45 degree.Specs Borosilicate glass...

An ash catcher with a barrel percolator, which is a horizontal slitted cylinder rather than a flat disc. Barrels give strong diffusion with less restriction than a honeycomb, so you get good cooling without fighting for the pull.A sensible middle ground if honeycombs feel...