Terp Slurpers

Terp Slurpers – Maximum Flavor, Zero Waste Dabbing Terp slurpers are the ultimate dabbing accessory for flavor chasers and concentrate connoisseurs. This innovative banger design features a bottom dish, vertical slits, and a middle chamber that work together to vaporize every last drop of your concentrate—delivering unmatched flavor intensity while...

Terp Slurpers – Maximum Flavor, Zero Waste Dabbing

Terp slurpers are the ultimate dabbing accessory for flavor chasers and concentrate connoisseurs. This innovative banger design features a bottom dish, vertical slits, and a middle chamber that work together to vaporize every last drop of your concentrate—delivering unmatched flavor intensity while eliminating the waste common with traditional bangers.

Our collection features terp slurpers in premium quartz construction with various joint sizes (10mm, 14mm, 18mm) and angles (45° and 90°) to fit any dab rig setup. Many include complete accessory sets with terp pearls, pillars, and marble caps for optimal airflow and heat distribution right out of the box.

How Terp Slurpers Work

Unlike standard bangers where concentrate sits in a single bucket, terp slurpers use a multi-chamber design with vertical slits cut into the bottom dish. When you inhale, air is pulled through these slits, creating a vortex that continuously cycles your concentrate upward through the chambers. This "slurping" action ensures complete vaporization at lower temperatures, maximizing terpene preservation and eliminating pooling or waste.

The design typically includes three key zones: a bottom dish where concentrate is loaded, a middle section with vertical airways, and a top bucket where vapor collects before inhalation. Terp pearls spin in the bottom dish to distribute heat evenly, while a marble or valve cap on top regulates airflow and maintains optimal temperature throughout your dab.

Why Choose a Terp Slurper?

  • Maximum Flavor – Low-temp capability preserves terpenes for full-spectrum taste
  • Zero Waste – Slurping action vaporizes every drop of concentrate
  • Efficient Vaporization – Multi-chamber design ensures complete consumption
  • Lower Temperatures – Effective at temps that would leave residue in standard bangers
  • Visual Experience – Watch pearls spin and concentrate cycle through chambers
  • Smooth Hits – Cooler vapor means less throat irritation
  • Premium Quartz Construction – Superior heat retention and clean flavor
  • Compatible Accessories – Works with terp pearls, pillars, marbles, and valve caps

Terp Slurper Components

Terp Pearls are small spheres (usually quartz, ruby, or silicon carbide) that spin in the bottom dish when you inhale. They distribute heat evenly across your concentrate, prevent hot spots, and ensure consistent vaporization. Most users add 2-3 pearls to their slurper setup.

Terp Pillars are cylindrical pieces that sit vertically in the middle chamber. They add surface area for vaporization and help regulate airflow between the bottom dish and top bucket. Pillars create additional turbulence that improves flavor extraction.

Marble Caps (also called valve caps or slurper caps) sit on top of the terp slurper to seal the system and control airflow. The marble creates the pressure differential needed for the slurping action. Without a proper cap, terp slurpers won't function correctly.

Terp Slurper vs. Traditional Banger

Standard flat-top bangers hold concentrate in a single bucket where it can pool, char, or go to waste if temperatures aren't perfect. Terp slurpers solve this by continuously cycling concentrate through multiple chambers—meaning you get full vaporization even at lower temperatures where traditional bangers would leave residue behind. The tradeoff is slightly more complex setup and cleaning, but most dabbers find the flavor improvement and efficiency gains well worth it.

Terp Slurper Materials

Quartz Terp Slurpers are the industry standard, offering excellent heat retention, pure flavor with no off-gassing, and easy visual monitoring of your dab. Quality quartz slurpers are made from American or imported fused quartz that can withstand repeated heating cycles without devitrification (clouding).

Opaque Bottom Slurpers feature a frosted or opaque dish that retains heat longer than clear quartz, allowing for even lower temperature dabs with extended vapor production.


Terp Slurper FAQ

What is a terp slurper?

A terp slurper is a specialized dab banger with a multi-chamber design featuring a bottom dish with vertical slits, a middle tube section, and a top bucket. When you inhale, concentrate is "slurped" upward through the chambers, creating continuous vaporization that maximizes flavor and eliminates waste. They're designed for low-temperature dabbing and are popular among flavor-focused concentrate enthusiasts.

How do you use a terp slurper?

Heat the bottom dish and middle section with a torch until evenly heated, then let it cool to your preferred temperature (usually 30-60 seconds depending on quartz thickness). Add terp pearls to the bottom dish, drop your concentrate into the dish, place the marble cap on top, and inhale slowly. The airflow will pull concentrate upward through the slits, spinning the pearls and vaporizing your dab completely.

What temperature should I use for a terp slurper?

Terp slurpers work best at low temperatures, typically between 450°F and 550°F (230°C-290°C). The multi-chamber design allows effective vaporization at temps where traditional bangers would leave residue. Start around 500°F and adjust based on preference—lower for maximum flavor, slightly higher for larger clouds. Using a temperature gun or e-nail ensures consistent results.

Do you need terp pearls for a terp slurper?

While terp slurpers technically function without pearls, they perform significantly better with them. Terp pearls spin in the bottom dish when you inhale, distributing heat evenly across your concentrate and preventing hot spots. Most users add 2-3 small pearls (4-6mm) to their setup. The pearls also create visual feedback—when they're spinning well, you know airflow is optimal.

What is a terp pillar?

A terp pillar is a small cylindrical accessory that sits vertically in the middle chamber of a terp slurper. Pillars add surface area for vaporization, create additional turbulence in the airflow, and help regulate the cycling of concentrate between chambers. They're optional but can improve flavor extraction and vapor production, especially with larger dabs.

Do I need a special cap for a terp slurper?

Yes, terp slurpers require a marble cap (also called a valve cap or slurper cap) to function properly. The marble sits on top of the slurper and creates the seal needed for the slurping action. Standard carb caps won't work because they don't create the right pressure differential. Most terp slurper sets include a matching marble cap.

How do you clean a terp slurper?

Clean your terp slurper after each session for best results. While still warm (not hot), use a cotton swab to wipe residue from the bottom dish and chambers. For deeper cleaning, soak the slurper in isopropyl alcohol (99%) for 10-30 minutes, then rinse with warm water. Clean the vertical slits carefully—a pipe cleaner works well for this. Regular maintenance prevents buildup that affects flavor and airflow.

Why is my terp slurper not slurping?

If your terp slurper isn't cycling concentrate properly, check these common issues: the marble cap may not be sealing correctly, the vertical slits might be clogged with residue, the temperature may be too low (concentrate won't vaporize) or too high (burns before cycling), or you may be inhaling too hard or too soft. Clean the slits thoroughly, ensure proper cap placement, and experiment with heat timing and draw speed.

Terp slurper vs. blender banger: what's the difference?

Both are designed for efficient low-temp dabbing, but they work differently. Terp slurpers use vertical slits and a multi-chamber design that pulls concentrate upward in a cycling motion. Blender bangers have angled slits in the bottom that create a spinning vortex, keeping concentrate in a single chamber. Slurpers typically offer better flavor extraction, while blenders are easier to clean and use. Both outperform traditional flat-top bangers.

What joint size terp slurper do I need?

Terp slurpers come in 10mm, 14mm, and 18mm joint sizes to fit different dab rigs. Check your rig's joint size before purchasing—14mm is most common. Also confirm the joint angle: 90-degree joints fit straight-neck rigs, while 45-degree joints fit angled or bent-neck rigs. The slurper should sit level when installed so concentrate doesn't pool to one side.

Are terp slurpers worth it?

For flavor-focused dabbers, terp slurpers are absolutely worth it. They deliver noticeably better taste than traditional bangers, waste less concentrate, and work efficiently at lower temperatures. The tradeoff is a higher price point, more accessories to manage, and slightly more involved cleaning. If you prioritize flavor and efficiency over convenience, a quality terp slurper is a worthwhile investment.

Can you cold start a terp slurper?

Yes, terp slurpers work well for cold start (reverse) dabs. Load your concentrate into the bottom dish, add pearls, place the marble cap on top, then heat the bottom with your torch while inhaling gently. Once vapor appears and pearls start spinning, remove heat and continue your draw. Cold starts preserve terpenes and give you precise control over temperature, making them popular with terp slurper users.

Recently Viewed Products