Wulf Mods Pillar Mini E-Rig

The Pillar Chronicles: A History of Strong Puffs

Your sessions with wax concentrates will be changed! The Wulf Mods Pillar Mini E-Rig is known to be the world‘s 1st smart E-rig with TGT heating technology. This new device has a zinc alloy body, magnetic connection, and adjustable airflow. The Pillar also features three voltage settings (3.2V, 3.7V, and 4.2V), a 10-second preheat mode, and a 30-second safety cutoff. Powered by a 1,400mAh battery, this device includes a Type-C port for fast charging.

How to Load:

First, fill water into the glass up to the water line at the top of the hole. Then, fill the concentrate into the coil. Next, attach the glass to the battery and adjust the airflow valve for the best vaping experience.

How to Start Using the Pillar:

To turn on the device, quickly press the power button five times. Afterward, to adjust the temperature, press the power button three times. Then, to initiate the preheat cycle, press the power button twice. The device will preheat for 10 seconds. To power off the device, press the power button five times.

How to Charge:

Upon receiving the unit, charging it for 1.5 hours is recommended. Overcharging the battery beyond this time may damage or reduce its lifespan. You can determine that the Pillar is fully charged by checking that the LED on the button has turned off.

Troubleshooting:

White lights will flash ten times when the device continues to heat for over 15 seconds.

In case of a short circuit, the device will flash red lights five times.

If the battery is low, red lights will blink ten times to notify you.

The device will indicate this when there is no atomizer by flashing red lights three times.

What’s Included:

• (1) Wulf Pillar Kit
• (1) TGT QUAD Coil
• (1) TGT Coil
• (1) Pick Tool
• (1) Type-C USB Cable
• (1) Instruction Manual

WARNING: Do not charge with a powerbank of 5V or higher. Do not charge in your car. Do not overcharge or use any other charging cable other than what comes with your battery. Failure to follow these instructions could result in battery damage and frying of the internal system.