A DynaVap is a battery-free dry herb vaporizer that uses a butane torch or induction heater to warm a stainless steel or titanium cap, which in turn vaporizes ground flower loaded into the device's chamber. Each DynaVap features a thermoresponsive bimetallic disc inside the cap that produces an audible click when the cap reaches the optimal vaporization temperature — eliminating the guesswork of timing and removing the need for electronic temperature control. The result is a pocket-sized vaporizer with no battery to charge, no firmware to update, no electronics to fail, and immediate session-on-demand performance. DynaVap was founded in 2015 in Wisconsin and pioneered the click-cap battery-free vaporizer category.

How do I use a DynaVap?

Grind your dry herb to a medium-fine consistency and pack the heating chamber loosely — about a small pinch. Replace the cap on the body. Hold a small butane torch flame to the bottom of the cap from about 1 to 2 inches away, rotating the device slowly for even heating. After approximately 5 to 7 seconds, you will hear an audible click — that is the thermoresponsive disc indicating the cap has reached vaporization temperature. Remove the flame immediately, place the mouthpiece to your lips, and draw slowly for 10 to 15 seconds. As the cap cools, the device clicks a second time to indicate you can reheat for additional sessions. Each chamber-load typically produces 2 to 4 cycles of vapor before the herb is fully extracted.

How do I clean a DynaVap?

DynaVap recommends cleaning every 5 to 10 sessions for optimal flavor. Disassemble the device by removing the cap, condenser, midsection, and mouthpiece. Soak all metal parts (cap, condenser, midsection) in 91% or higher isopropyl alcohol for 15 to 30 minutes. Use a pipe cleaner or cotton swab to scrub residue from inside the chamber and condenser airpath. Rinse thoroughly with warm water and dry completely before reassembly. Wood components like wooden mouthpieces and stash boxes should be wiped with a slightly damp cloth only — never soaked in alcohol, which will dry out and discolor the wood. The DynaKit Maintenance kit includes brushes and pipe cleaners sized for each component and makes the process easier.

What is the difference between DynaVap M, B, and Omni models?

The M is DynaVap's flagship full-stainless steel model and the most popular starting point — durable, affordable, and consistent. The B is a budget-friendly option with a simplified airpath and slightly less refined heating profile, ideal for first-time buyers or backup devices. The Omni adds an adjustable airport (a fully tunable airflow ring) that lets you control vapor density mid-session, preferred by users who want fine control over draw resistance and heat retention. The VonG and OmniVong models combine the Omni's adjustable airflow with a wooden midsection for a premium feel and slightly cooler draws. All variants share the same click-cap heating principle and can use the same replacement caps interchangeably, so you can upgrade caps independently of the body.

What torch or lighter should I use with a DynaVap?

DynaVap is designed for use with a single-flame or quad-flame butane torch — the same kind used for cigars or culinary applications. Avoid traditional Bic-style lighters: the flame is too small and uneven, the device heats unevenly, and you will inhale butane combustion byproducts before the cap reaches temperature. Popular torch choices include the Vector Nitro, Honest Smile, and small jet-flame cigar torches. For an electronics-based alternative, DynaVap also sells the Orion induction heater, which heats the cap via magnetic field rather than open flame — quieter and more consistent, but battery-powered (defeating part of the battery-free appeal of the platform). Whichever heat source you use, hold the flame 1 to 2 inches away from the cap and rotate the device for even heating.

How do I know when my DynaVap is at the right temperature?

Every DynaVap cap contains a thermoresponsive bimetallic disc that audibly clicks when the cap reaches approximately 400 degrees Fahrenheit — the temperature at which most cannabinoids and terpenes vaporize cleanly. As you heat the cap with a torch, you will hear a distinct metallic click sound at the moment the disc deforms; that is your cue to stop applying flame and start drawing. As the cap cools, the disc returns to its original shape with a second click — letting you know the cap has cooled below extraction temperature. For lower-temperature, more flavor-focused sessions, start drawing immediately at the first click. For thicker, more potent vapor, wait 1 to 2 seconds after the first click before drawing. Never continue heating after the click — that is how you scorch your herb.

Can I use a DynaVap with concentrates or wax?

Yes, with the Cap 'N Coil Tip Kit. The standard DynaVap chamber is designed for dry herb, but DynaVap's Cap 'N Coil Tip Kit replaces the standard heating chamber with a coil-style atomizer compatible with concentrates, oils, and wax. The Omni Cap 'N Coil Tip Kit fits Omni body styles, and the VonG Cap 'N Coil Tip Kit fits VonG body styles — choose based on which DynaVap device you own. To use, install the conversion kit, apply a small amount of concentrate directly to the heated coil, heat the cap with your torch as normal, and draw. Cleaning is similar to standard DynaVap maintenance but requires more frequent isopropyl alcohol soaks because concentrate residue builds up faster than dry herb residue.

DynaVap

Q: What is the difference between DynaVap M, B, and Omni models?

The M is DynaVap&#39;s flagship full-stainless steel model and the most popular starting point — durable, affordable, and consistent. The B is a budget-friendly option with a simplified airpath and slightly less refined heating profile, ideal for first-time buyers or backup devices. The Omni adds an adjustable airport (a fully tunable airflow ring) that lets you control vapor density mid-session, preferred by users who want fine control over draw resistance and heat retention. The VonG and OmniVong models combine the Omni&#39;s adjustable airflow with a wooden midsection for a premium feel and slightly cooler draws. All variants share the same click-cap heating principle and can use the same replacement caps interchangeably, so you can upgrade caps independently of the body.

Q: Can I use a DynaVap with concentrates or wax?

Yes, with the Cap &#39;N Coil Tip Kit. The standard DynaVap chamber is designed for dry herb, but DynaVap&#39;s Cap &#39;N Coil Tip Kit replaces the standard heating chamber with a coil-style atomizer compatible with concentrates, oils, and wax. The Omni Cap &#39;N Coil Tip Kit fits Omni body styles, and the VonG Cap &#39;N Coil Tip Kit fits VonG body styles — choose based on which DynaVap device you own. To use, install the conversion kit, apply a small amount of concentrate directly to the heated coil, heat the cap with your torch as normal, and draw. Cleaning is similar to standard DynaVap maintenance but requires more frequent isopropyl alcohol soaks because concentrate residue builds up faster than dry herb residue.

DynaVap makes the world's best-known battery-free dry herb vaporizers — handheld, torch-heated devices that deliver clean, flavorful vapor without electronics, batteries, or apps. Discreet Smoker stocks the active DynaVap catalog including the M Series, the new UniDyn ball vape, the WoodWynd, replacement caps, condenser kits, and the DynaStash and SlingStash storage line. Free shipping on orders over $69, discreet packaging on every order.

How DynaVap Works

Every DynaVap is built around a stainless steel or titanium heating cap that you warm with a butane torch (or induction heater) for 5 to 7 seconds. When the cap reaches the optimal vaporization temperature, a thermoresponsive metal disc inside the cap audibly clicks — your cue to stop heating and start drawing. Because there's no battery, no firmware, and no charging cycle, a DynaVap delivers immediate sessions on demand, works at sub-zero temperatures, and lasts for years with basic maintenance. The torch-heated approach also produces denser, more flavorful vapor than most battery-powered dry herb pens.

DynaVap M Series

The M is DynaVap's flagship product line — the original stainless steel battery-free vaporizer that defined the click-cap category. Each M iteration refines the airflow path, heating profile, and Z-shaped airport for cleaner draws and faster ramp-up.

DynaVap M7

The current standard M model. Stainless steel construction, Z-airport for total airflow control, faceted condenser for stable cap rotation, and the signature click temperature indicator. The starting point for most new DynaVap users.

DynaVap M+ and M7 XL

Premium M-series variants with engraved bodies and exclusive colorways including RosiuM (purple, pink, gold) and ObsidiuM (onyx and bronze mirror finish). Same battery-free thermal extraction core as the M7 in a more durable, collector-grade finish.

DynaVap UniDyn (Ball Vape)

DynaVap's newest flagship — a ball vape design built specifically for flavor enthusiasts. The UniDyn replaces the traditional convection chamber with a glass ball-vape style heat exchanger for extended, terpene-preserving vapor production. Compatible with the Thermal Hyper Cap for advanced temperature control and pairs well with the SlingStash storage tube for portability.

DynaVap WoodWynd

A limited-run dry herb vaporizer combining DynaVap's battery-free internals with a hand-finished hardwood body. Each WoodWynd is unique — wood grain, color, and finish vary from device to device. The Blackwood edition pairs the company's standard heater core with a sustainably-sourced Blackwood midsection.

DynaVap Caps & Tips

The cap is the heated component of every DynaVap, and the design of the cap determines temperature stability, click responsiveness, and overall vaporization performance.

Thermal Hyper Cap (T.H.C.)

DynaVap's latest cap architecture, engineered for the UniDyn and modern M-series devices. The dual-walled construction provides more consistent click timing and improved heat retention versus standard caps.

Armored Cap

A heavier, ridged cap variant with enhanced durability for daily users. Compatible with most DynaVap devices and provides a slightly later click point for hotter, denser draws.

Cap 'N Coil Tip Kits (Omni and VonG)

Conversion kits that let you use your DynaVap with concentrates or oils in addition to dry herb. Includes the heating cap, dynacoil insert, and dab tip configured for either Omni or VonG body styles.

DynaVap Stash & Storage

Purpose-built storage designed for the DynaVap form factor.

DynaStash

A hand-finished hardwood dugout designed to hold a standard 92mm DynaVap device. The DynaStash ER includes a herb chamber and stash compartment alongside the device slot. Available in Wenge and other sustainably-sourced hardwoods.

SlingStash and SlimStash

Travel-ready aluminum tubes (SlingStash) and slim wooden cases (SlimStash) for keeping your DynaVap protected during transport. The SlingStash includes a wrist sling and is available in Black and Green.

Replacement Parts & Maintenance

DynaVaps are designed to be user-serviceable. Discreet Smoker stocks the DynaKit Maintenance kit for general upkeep, condenser O-ring replacement kits, and 3-pack stainless steel and titanium screen replacements to keep your device performing like new for years of daily use.

Why Buy DynaVap from Discreet Smoker

Every DynaVap product at Discreet Smoker is sourced through authorized channels and ships with the full DynaVap manufacturer warranty. Orders ship in unbranded packaging with no smoke shop or vape branding visible, and free shipping kicks in at $69.

Frequently Asked Questions

What is a DynaVap?

A DynaVap is a battery-free dry herb vaporizer that uses a butane torch or induction heater to warm a stainless steel or titanium cap, which in turn vaporizes ground flower loaded into the device's chamber. Each DynaVap features a thermoresponsive bimetallic disc inside the cap that produces an audible click when the cap reaches the optimal vaporization temperature — eliminating the guesswork of timing and removing the need for electronic temperature control. The result is a pocket-sized vaporizer with no battery to charge, no firmware to update, no electronics to fail, and immediate session-on-demand performance. DynaVap was founded in 2015 in Wisconsin and pioneered the click-cap battery-free vaporizer category.
How do I use a DynaVap?

Grind your dry herb to a medium-fine consistency and pack the heating chamber loosely — about a small pinch. Replace the cap on the body. Hold a small butane torch flame to the bottom of the cap from about 1 to 2 inches away, rotating the device slowly for even heating. After approximately 5 to 7 seconds, you will hear an audible click — that is the thermoresponsive disc indicating the cap has reached vaporization temperature. Remove the flame immediately, place the mouthpiece to your lips, and draw slowly for 10 to 15 seconds. As the cap cools, the device clicks a second time to indicate you can reheat for additional sessions. Each chamber-load typically produces 2 to 4 cycles of vapor before the herb is fully extracted.
How do I clean a DynaVap?

DynaVap recommends cleaning every 5 to 10 sessions for optimal flavor. Disassemble the device by removing the cap, condenser, midsection, and mouthpiece. Soak all metal parts (cap, condenser, midsection) in 91% or higher isopropyl alcohol for 15 to 30 minutes. Use a pipe cleaner or cotton swab to scrub residue from inside the chamber and condenser airpath. Rinse thoroughly with warm water and dry completely before reassembly. Wood components like wooden mouthpieces and stash boxes should be wiped with a slightly damp cloth only — never soaked in alcohol, which will dry out and discolor the wood. The DynaKit Maintenance kit includes brushes and pipe cleaners sized for each component and makes the process easier.
What is the difference between DynaVap M, B, and Omni models?

The M is DynaVap's flagship full-stainless steel model and the most popular starting point — durable, affordable, and consistent. The B is a budget-friendly option with a simplified airpath and slightly less refined heating profile, ideal for first-time buyers or backup devices. The Omni adds an adjustable airport (a fully tunable airflow ring) that lets you control vapor density mid-session, preferred by users who want fine control over draw resistance and heat retention. The VonG and OmniVong models combine the Omni's adjustable airflow with a wooden midsection for a premium feel and slightly cooler draws. All variants share the same click-cap heating principle and can use the same replacement caps interchangeably, so you can upgrade caps independently of the body.
What torch or lighter should I use with a DynaVap?

DynaVap is designed for use with a single-flame or quad-flame butane torch — the same kind used for cigars or culinary applications. Avoid traditional Bic-style lighters: the flame is too small and uneven, the device heats unevenly, and you will inhale butane combustion byproducts before the cap reaches temperature. Popular torch choices include the Vector Nitro, Honest Smile, and small jet-flame cigar torches. For an electronics-based alternative, DynaVap also sells the Orion induction heater, which heats the cap via magnetic field rather than open flame — quieter and more consistent, but battery-powered (defeating part of the battery-free appeal of the platform). Whichever heat source you use, hold the flame 1 to 2 inches away from the cap and rotate the device for even heating.
How do I know when my DynaVap is at the right temperature?

Every DynaVap cap contains a thermoresponsive bimetallic disc that audibly clicks when the cap reaches approximately 400 degrees Fahrenheit — the temperature at which most cannabinoids and terpenes vaporize cleanly. As you heat the cap with a torch, you will hear a distinct metallic click sound at the moment the disc deforms; that is your cue to stop applying flame and start drawing. As the cap cools, the disc returns to its original shape with a second click — letting you know the cap has cooled below extraction temperature. For lower-temperature, more flavor-focused sessions, start drawing immediately at the first click. For thicker, more potent vapor, wait 1 to 2 seconds after the first click before drawing. Never continue heating after the click — that is how you scorch your herb.
Can I use a DynaVap with concentrates or wax?

Yes, with the Cap 'N Coil Tip Kit. The standard DynaVap chamber is designed for dry herb, but DynaVap's Cap 'N Coil Tip Kit replaces the standard heating chamber with a coil-style atomizer compatible with concentrates, oils, and wax. The Omni Cap 'N Coil Tip Kit fits Omni body styles, and the VonG Cap 'N Coil Tip Kit fits VonG body styles — choose based on which DynaVap device you own. To use, install the conversion kit, apply a small amount of concentrate directly to the heated coil, heat the cap with your torch as normal, and draw. Cleaning is similar to standard DynaVap maintenance but requires more frequent isopropyl alcohol soaks because concentrate residue builds up faster than dry herb residue.